激情五月天婷婷综合,任我干在线

JOGLER 磁翻板液位計

2012/4/16 17:16:39

產品簡介：

9715 Derrington Road Houston, TX 77064 P: 281.469.6969 F: 281.469.0422 TF: 800.223.8469 www.Jogler.com sales@Jogler.com Jogler’s MGT-6000 series liquid level transmitter is the latest development in magnetostrictive liquid level sensing technology that is designed exclusively for magnetic level indicators. The MGT-6000 contains a low profile waveguide that is mounted away from the level gage chamber. This design isolates the dual sealed waveguide from excessive vibration and temperature. From enhanced sensor technology, the output signal is very sensitive, fast, stable and accurate. The MGT-6000 can be mounted and retrofitted to most magnetic liquid level indicators.

產品分類：

物聯網 儀器儀表物位/液位儀表現場儀表感知層液位計物液位傳感器

品牌：

產品介紹

pickup and waveguide probe. It uses the magnetic field that emanates from the internal float to produce an electronic level signal output. A low energy pulse generated by the transmitter electronics spans the waveguide probe and determines a base time-of-flight interval. As the internal float reacts to liquid level fluctuations within the chamber, the magnetic field deflects the waveguide sensing wire, When this occurs, the time-offlight interval changes which is detected by the transmitter sensor pickup and converts the deflection to an electrical signal. The transmitter electronics recalculates a proportional signal output relative to the level elevation. The primary benefits are the entire transmitter assembly remains non-invasive to process conditions and can be field checked without disruptions or exposure to operations.
• 24 VDC nominal, two wire, loop powered
• LCD display in 4-20 mA, in/cm and/or percent output signal
• Local and remote detection for total or interface elevations
• HART protocol field communication
• Local programmability allows for easy parameter changes
• Quick-Cal function for simple recalibration to any span
• Non wetted, dual sealed 316 SS low profile waveguide
• Isolated from excessive process temperature & vibration
• Top, bottom or remote transmitter head mounting locations
• Short offset mounting dimension of 7.00 inches
• Accuracy of 0.01% of total span from enhanced sensitivity
• Very durable with a strong, stable & noise free output
• State of the art sensor and transmitter electronics
• Unique transmitter puck design for ease of installation
• Maximum transmitter length of 20 feet
• Will retrofit to most magnetic level indicators
• Capable of extreme process operating temperatures
• Explosion proof housing, NEMA Type 4X
• Class I, Division 1, Groups B, C, D
• Class II, Division 1, Groups E, F, G: Class III