SMT結合了信號生成，通信，計算能力和存儲深度等先進的測量技術。提供了一整套模塊化系統的物理IO和通信接口。

系統設計

獨特的模塊的概念，每個單獨應用的最優化。通道可以擴展到幾乎任何程度IO從幾個到幾百個。智能網絡的管理，分散系統或大的空間距離也沒有問題。

SMT的模塊化測量和通信通道沒有限制?；A(chǔ)的系統特性，如能源供應，冷卻和計算能力可以進行相應的調整，以適應特殊情況。同時，Softing 測量技術是為了以最好的狀態的整合。模塊化設計可以根據功能所需配置最小尺寸。

應用領域

SMT系統是堅固耐用的，他們是完美的用在苛刻的測試車輛使用環境。他們往往都作為測試平臺和制造用于固定應用研究。SMT任務是決不限于簡單地獲取測量值。組合測量，測試和自動化系統，Softing 測量技術還可以實現對負責有關地區的控制和監管，過程監控和自動化，實時仿真和數據記錄功能。

優勢

從發展伊始，SMT不得不滿足用戶要求苛刻的測量技術。在實踐中它們往往只存在細小的區別。通過設計安裝的標準的連接器，綜合安全和自診斷功能。同時SMT注重用戶友好性和功能的透明，培訓和熟練使用所需的時間是最小的。標準附件范圍保證了通用性。

由于其模塊化的測量技術，具有很大的靈活，開放的專有技術以及獨立程度高且透明接口，保證未來的投資。

模塊預覽

SMT模塊分為三類

系統模塊覆蓋地區的能源供應，冷卻和網絡以及數據處理。

可溝通的接口部件

物理IO是用于獲取物理值，并支持大量常見的傳感器。

系統模塊：

V12-120.4 – Supply Module (12V/120W)

The V12-120.4 is a supply module for operating SMT systems with a 12V on-board electrical system or battery supply. It supplies galvanically isolated power with power output of up to 120W and offers a range of additional functions such as wake-up on timer, ignition or CAN.

V12-240.1 – Supply Module (12V/240W)

The V12-240.1 is a supply module for operating SMT systems with a 12V on-board electrical system or battery supply. It supplies galvanically isolated power with power output of up to 240W and offers a range of additional functions such as wake-up on timer, ignition or CAN.

XLL.2 / XLR.2 – Fan Modules (Left & Right)

The fan modules are on the side of every SMT system. They actively cool the individual components and thus enable reliable operation over a wide environmental temperature range. Fan speed is controlled based on the inside temperatures of all integrated modules.

LBITSTER.2 - Link Module for SMT Components

For decentrally operated SMT systems, the LBITSTER.2 acts as a link between the SMT host and SMT sub-systems [host / sub-system], remote SMT sub-systems [sub-system / sub-system] or as a migration module for integrating third-party components into SMT systems.

ICANSYS.3 - Interface for Field Bus Components

The ICANSYS.3 is a one-channel interface module for linking CAN-based measurement technology into SMT systems. In addition to the integrated CAN node, it powers the external components. Up to 160 signals can be acquired via the galvanically isolated interface of the ICANSYS.3, the termination is integrated in the module.